Weicon Corrosion Protection Wax Spray 400 ml

Weicon Corrosion Protection Wax Spray 400 ml is a wax-based technical spray developed to protect metal parts against rust and oxidation during storage and shipping. Thanks to its excellent creeping properties, it penetrates even the smallest gaps and forms an even, non-slip protective film. The fast-drying, elastic film helps reduce the risk of corrosion by displacing moisture from the surface. The manufacturer is WEICON GmbH & Co. KG, and the product is of German origin.

Surface protection approach with WEICON Wax Spray
With its wax-based composition, this product is positioned as a technical spray that forms a dry, waxy protective layer on metal surfaces. Its magenta color makes it easier to visually control the treated area and helps monitor coating continuity in practice. The silicone-free formulation makes surface compatibility more manageable in many maintenance and assembly environments. The film is designed to provide protection on surfaces such as steel, aluminum, and zinc without damaging plastics or rubber. It offers a solution aimed at protecting parts from the effects of weather and ambient conditions during storage, transport, and operation.

Technical spray performance and resistance properties
For Weicon Corrosion Protection Wax Spray, the temperature resistance is defined in the range of -20 °C to +80 °C. A performance value of over 500 hours in the salt spray test (DIN 53167:1985-12) is an important indicator, especially for a protective film target in storage and transport. The consumption information of approximately 2 m² with a 1.5 cross-coat application helps with usage planning on larger surfaces. It is stated that the layer fully cures after about 3–4 hours at room temperature, so this time should be considered in shipping or stock planning. The ISSA and IMPA codes and the stated compliance with MIL-T-83523 provide a brief reference point for procurement and standards tracking.

Application method and removable protective film
Before application, surfaces must be cleaned and degreased; this step is a critical basis for proper adhesion of the protective film. After surface preparation, the product is applied evenly by spraying onto the area to be protected and allowing the film to form. If stronger corrosion protection is needed, multiple coats can be applied, aiming to maintain a consistent curing sequence between layers. The resulting protective film can be removed when necessary using WEICON Cleaner Spray S, which adds practicality for maintenance and rework scenarios. Because it is a pressurized can, it must be stored away from direct sunlight and protected from temperatures above +50 °C.

Sector-based applications and compatible surfaces
This technical spray is used to provide reliable corrosion protection for bare and unpainted metal parts during long-term indoor storage. For medium-term outdoor storage, it offers a protective coating approach aimed at reducing risks created by weather conditions on the part surface. It can be preferred for long transport processes such as overseas shipments, to protect metal surfaces against rust accelerated by moisture and salt exposure. It is also applicable in maintenance-focused scenarios such as conservation of tools, fixtures, and sensitive metal components, as well as post-protection of vehicle parts. Its compatibility with steel, aluminum, and zinc surfaces, together with a design intended not to harm plastics or rubber, enables broad use across different industries with a single product.