Medmix Mixpac MAQ 05-16L Static Mixer

Medmix Mixpac MAQ 05-16L Static Mixer is a disposable static mixer developed for the homogeneous mixing of two-component adhesives and sealing materials before application. It is not a chemical product itself, but one of the consumable components that determine the mixing quality of the application system. Operating with QUADRO mixing geometry, this model stands out especially in processes that require controlled dosing and consistent mixing. The product is offered under the MIXPAC brand by medmix Switzerland AG, based in Switzerland.

Technical Structure of the MAQ 05-16L Static Mixer
This model is a QUADRO-type static mixer within the MIXPAC A-System and is associated with 50 mL volume systems. According to official catalog data, it has 16 mixing elements, a 5.3 mm inner diameter, and an approximate waste volume of 1.30 mL. The outlet type is defined as Luer Slip, which provides an advantage in applications requiring finer tip and accessory integration. Within the product family, the same series is listed as compatible with A-System cartridges in 1:1, 2:1, 4:1, and 10:1 mixing ratios.

QUADRO Mixing Principle and Application Method
According to medmix’s official descriptions, QUADRO mixer geometry was developed to deliver high mixing performance and low pressure drop within a more compact structure. For this reason, in two-component industrial adhesive systems, it helps the material achieve a more balanced and repeatable mixture before reaching the point of application. In use, the mixer is attached to a compatible dual cartridge and suitable dispenser; the material is then applied to the surface after a short purge process until mix stability is achieved at the outlet. The Luer Slip outlet design makes the process more manageable in precision tasks such as fine-line application, controlled spot dispensing, or application into narrow areas.

Compatible Systems and Sectoral Areas of Use
This static mixer is used together with 2K industrial adhesives and sealing materials in production, assembly, maintenance, and repair processes. It can be used in small-component bonding and potting-type operations in the electrical and electronics sector, in precision subassembly applications in the automotive supply industry, and in service and repair operations in general industry. Composite part bonding, device assembly, technical service applications, and controlled filling processes are also among its suitable areas of use. Its ability to improve mixing consistency is a major advantage, especially in low- and medium-volume processes requiring precise application.

Advantages in Industrial Processes
A key benefit of the MAQ 05-16L is that it reduces the need for manual mixing and provides a cleaner, more standardized application flow. Thanks to its disposable structure, the need for cleaning is reduced, the risk of contamination between processes is lowered, and operator-related mixing deviations are minimized. Its compatibility with the A-System allows the cartridge, mixer, and dispenser to be used within the same system logic, increasing application reliability. Since official technical data does not clearly provide additional performance values such as temperature resistance, chemical resistance, or pressure resistance for this model, no unverified technical claims should be made in these areas.