WEICON Dispenser Easy-Mix D 50
It is a dispensing gun developed for 50 ml dual-cartridge two-component adhesive systems. It provides controlled dosing and clean application in assembly, maintenance, and production processes. Its durable and reusable design supports process efficiency.
Shipping Time 24 Hours : Weekdays 09:00-17:00- 100% Original: All products with UTM Teknik guarantee
Item(s) left: 0
WEICON Easy-Mix D 50 is a reusable dispensing gun developed for 50 ml dual-cartridge Easy-Mix systems. Offered by Germany-based WEICON GmbH & Co. KG, this equipment is designed as a process solution that enables dispensing, mixing, and application in a single step. Its body is stated to be made of glass fiber-reinforced polyamide, supported by a metal lever mechanism, and designed with a break-resistant structure. This construction provides a more controlled and reliable workflow, especially in production and maintenance processes that require repeatable adhesive application.
Easy-Mix D 50 Technical Structure and System Compatibility
The Easy-Mix D 50 is positioned on the manufacturer’s system page as a tool for processing 50 ml Easy-Mix cartridges. In the official technical data sheet, epoxy, polyurethane, and structural acrylic Easy-Mix types are listed within the same system together with Quadro and Helix mixing nozzles. By contrast, it is also noted that a separate dispenser option is defined for special-ratio applications such as PE-PP 45. For this reason, the product should be selected not so much according to direct surface compatibility, but rather according to cartridge type, mixing nozzle, and process geometry.
Application Method and Process Control
In use, it is recommended that the surfaces to be bonded are first cleaned, then the dual cartridge is inserted into the gun and the static mixer is attached. The manufacturer states that the first approximately 5 cm of material coming out of the mixing nozzle should be discarded and that the material should be applied to one side only. This operating principle allows the resin and hardener to be mixed in a controlled manner through the system rather than inside the cartridge. As a result, ratio errors caused by manual mixing are reduced, material consumption becomes more controlled, and quality consistency in serial production is improved.
Durability and Operational Advantages
No numerical limits for heat, pressure, or chemical resistance are publicly provided for this equipment in the available product documentation. Its key performance characteristics are the mechanically robust, break-resistant body and its support for precise dispensing. WEICON states that the minimum shelf life at room temperature is unlimited, indicating that the product is positioned not as a consumable but as a long-life application tool. Its ergonomic and reusable design also offers a more orderly application process and less operator fatigue during extended use.
Easy-Mix D 50 Areas of Use
Because of this functional design, the Easy-Mix D 50 stands out as a strong support tool in machine and equipment manufacturing, maintenance and repair workshops, metal and rigid plastic part assembly, composite applications, and general production lines requiring controlled two-component bonding. It provides a clear advantage particularly in small- and medium-scale serial assembly processes where the same amount of material must be applied repeatedly. Its ability to work with different Easy-Mix chemistries within the same system concept makes it easier to switch between different bonding scenarios using a single gun in production. Neither the published product page nor the technical data sheet highlights a product-specific independent EN/ISO performance standard or certification; selection should therefore mainly be based on cartridge compatibility, mixer type, and process requirements.
