Adhetron Condy-Sil 752 is a semi-flowable, one-component RTV silicone material based on alkoxy silicone, developed for filling, encapsulation, coating, and sealing applications. This room-temperature-curing product stands out especially in processes where electronic components need to be protected and gaps must be filled in a controlled manner, thanks to its pourable structure. Although it is more flowable than typical paste-type silicones, it still maintains a thixotropic character that helps limit run-off during curing. The Adhetron brand is offered under Pulsar Chem. Industry and Trade Co. INC.

Technical Structure and Core Features of Condy-Sil 752

This product is a silicone-based, one-component, semi-flowable sealing and encapsulation material with an alkoxy curing mechanism. Its translucent appearance may provide a visual inspection advantage in certain electronic and protective coating applications. According to the official technical data, its viscosity is 35,000–45,000 cps, while its specific gravity ranges from 0.95 to 1.01. The skin formation time is approximately 30 minutes, and the full cure time is given as about 72 hours for a 6 mm thickness at 25 °C and 50% relative humidity. This structure is suitable for applications where rapid surface formation and controlled through-cure are both required.

Post-Cure Performance and Resistance

In its cured state, the product has a Shore hardness value in the range of 10–20, which indicates that it forms a more flexible and adaptable silicone layer rather than a rigid filler. Its tensile strength is specified as 150 psi, and its elongation is given as 650%; therefore, it offers elasticity advantages in systems subject to vibration, thermal expansion, and slight movement. Since the operating temperature range is stated as -40 °C to +200 °C, it can be used in systems exposed to wide temperature fluctuations. In addition, dielectric strength of 19.5 kV/mm, a dielectric constant of 2.74, and a volume resistivity value of 6.03E+14 Ω·cm show that the product can also be considered for applications requiring electrical insulation.

Application Areas and Method of Use for Condy-Sil 752

Condy-Sil 752 is used in areas such as electronic board and component protection, terminal insulation, filling inside industrial enclosures, sealing at cable خروج points, potting, and encapsulation processes. It is a suitable solution in electronics, lighting, power equipment, automation systems, and general industrial production processes where protection against moisture, dust, and environmental effects is required. Before application, the surfaces must be clean, dry, and free from oil; the product is then poured or applied in a controlled manner to cover and fill the gaps. Thanks to its semi-flowable structure, it can penetrate complex geometries, but because it does not behave like a fully free-flowing liquid, it also helps reduce the risk of overflow during application. This feature is an important process advantage for operations requiring balanced filling and coating on sensitive electronic parts.

Compatible Systems and Key Advantages

The product is positioned especially for compatible use with electronic parts, electronic terminals, and similar industrial systems. Its non-corrosive structure is important in protective applications on metal contact surfaces and sensitive electronic components. Its one-component nature eliminates mixing errors, while its room-temperature curing simplifies the process. The semi-flowable form offers a balanced application character between coating and filling, which makes the product functional not only for sealing but also for protective encapsulation and applications requiring electrical insulation. Its ability to be stored for up to 12 months below 25 °C in its original packaging also provides a practical advantage in inventory management.