Weicon Industrial Cleaner NSF Approved 500 ml is an aerosol technical spray cleaner developed for fast cleaning and degreasing operations. It is designed to remove residues such as oil, grease, soot, and similar contaminants from surfaces and to evaporate without leaving any residue after use. This helps speed up workflows in steps such as maintenance, assembly, and surface preparation. Its ability to be used on many different materials makes it a practical technical spray option for on-site applications.

Fast degreasing and surface preparation with WEICON Industrial Cleaner
The product is a high-efficiency industrial cleaner intended for quick and effortless cleaning on metal, glass, and many plastic surfaces. Its residue-free evaporation supports surface preparation before processes such as bonding, sealing, or coating. Because it operates with a pressurized propellant system, it enables effective application during spraying and makes field use easier. It is manufactured by WEICON GmbH & Co. KG (Münster, Germany).

Compliance and standards as an NSF-approved technical spray
This product is registered in the NSF list under “Nonfood Compounds” in the K1 and K3 categories and is positioned within the framework referenced to FDA 21 CFR. This approach is an important indicator of suitability that allows work in maintenance and cleaning areas of food facilities when appropriate procedures are followed. In addition, the ISSA code information for the product is included in the technical documentation, which provides a practical advantage for classification in corporate cleaning and maintenance processes. When choosing an NSF-approved technical spray, it is important to establish a working practice that is compatible with the hygiene and process requirements of the application environment.

Technical structure and performance characteristics
Weicon Industrial Cleaner is described as a colorless aerosol cleaner blend with a solvent-based odor profile. It works with a very high active ingredient content, stated as 95% in the technical documentation, which can contribute to more applications per can. It is silicone-free and AOX-free; these features can be a reason for preference especially in terms of surface preparation and process compatibility. The boiling point given for the liquid active component is around 80 °C, and the minimum shelf life at room temperature is stated as 24 months.

Application method and safety notes
In use, an adequate amount is sprayed onto the part to be cleaned, allowed to act briefly, and wiped with a clean cloth if necessary; the process can be repeated for stubborn dirt. Due to its pressurized container, it should be protected from direct sunlight and not exposed to temperatures above 50 °C. In line with general safety principles for aerosol products, it is recommended to work in well-ventilated areas, keep away from ignition sources, and use personal protective equipment to prevent eye/skin contact. If required by operating procedures, it is good practice to perform the relevant hygiene checks before putting equipment back into service after application.

Areas of use and compatible surfaces
The product can be used in many areas such as maintenance workshops, production lines, machine and equipment cleaning, metalworking, automotive supply industry, packaging, and maintenance departments in food facilities. In addition to metals and glass, it is also stated to be usable on many plastics, rubber materials, and more sensitive surfaces such as powder-coated metal parts. Its residue-free evaporation can be an advantage in applications where leaving a film on the surface is undesirable. With broad surface compatibility and a fast-cleaning approach, it is a functional solution for maintenance teams aiming to handle multiple tasks with a single product.