Medmix Mixpac MAH 03-17S Static Mixer

Medmix Mixpac MAH 03-17S Static Mixer is a disposable static mixer developed for the homogeneous mixing of two-component adhesives and sealing materials before application. It is not a chemical product itself, but an application component that directly affects mix quality and application repeatability. Thanks to its helix-type mixing structure, it helps the components combine more evenly all the way to the outlet point. The product is offered under the MIXPAC brand by medmix Switzerland AG, headquartered in Switzerland.

Technical Structure of the MAH 03-17S Static Mixer
This model is a helical mixer within the MIXPAC A-System and is listed as compatible with 1:1 and 2:1 ratio two-component systems. According to official product data, it has 17 mixing elements, a 3.0 mm inner diameter, and a waste volume of 0.34 mL. Its outlet design is defined as a tapered tip, which provides an advantage in more controlled and relatively precise applications. The fact that the product is offered with a virgin plastics body structure is also important in terms of serial production and process standardization.

Mixing Principle and Application Method
The MAH series mixes the two components coming from the dual cartridge by redirecting them through the helix elements inside the mixer. In this way, the adhesive or sealing material achieves a more consistent mixture before reaching the surface. In use, the mixer is attached to a compatible A-System cartridge and suitable dispenser; the initial output is generally not used until mix balance is achieved, after which application begins. Compared with manual mixing, this structure provides advantages in terms of cleaner application and reduced operator-dependent variability.

Compatible Systems and Sectoral Areas of Use
In medmix’s official A-System setup, this mixer is used together with the 50 mL system and its related dispenser structure. It can be used in areas such as small-part assembly in the automotive supply industry, controlled resin and adhesive applications in electronics, and maintenance-repair and device assembly in general industry. Prototyping, precision filling, and low-volume two-component material applications are also among the processes for which this product is suitable. It is a functional solution especially for businesses that expect homogeneous mixing and clean application in small-dose processes.

Advantages in Industrial Processes
A key advantage of the MAH 03-17S is that it helps two-component materials be applied in a more orderly and standardized way in the field or on the production line. Its disposable structure reduces the need for cleaning and helps lower the risk of cross-contamination between processes. Since official technical data for this model does not clearly provide additional performance values such as temperature resistance, chemical resistance, or pressure resistance, no unverified technical claims should be made in these areas. For this reason, the product should be evaluated not for durability figures, but as a static mixer that stands out in terms of system compatibility, precision application, and mix consistency.