Weicon Mould Release Agent silicone-free lubricant 5 L
It is a silicone-free mould release agent and lubricant that forms a release film on the surface to prevent sticking during moulding operations. It is used in plastics processing lines such as injection moulding, pressing, and vacuum forming, providing a safe alternative where silicone contamination is not desired.
- Shipping Time 24 Hours : Weekdays 09:00-17:00
- 100% Original: All products with UTM Teknik guarantee
Item(s) left: 0
Weicon Mould Release Agent silicone-free lubricant (5 L) is a mould release liquid with a solvent odor, designed to prevent sticking by forming a separating film between surfaces in plastics processing and moulding operations. Thanks to its silicone-free formulation, it provides a lubricating effect within the process while aiming for controlled release on mould and part surfaces. Its colorless and transparent character supports use without leaving visible residue on the surface after application. The product is developed by Germany-based WEICON GmbH & Co. KG.
Structure and working principle of the WEICON Mould Release Agent
This product is a silicone-free lubricant and release agent based on a high-quality active ingredient combination made from pure natural products. Its basic working principle is to facilitate release by creating an anti-adhesive surface effect on plastics, moulds, metals, and tools. In the technical data, the product is described as colorless/transparent with a solvent odor, indicating that use should be planned together with ventilation and occupational safety practices. Being silicone-free can be a reason for preference in production environments where silicone contamination is not desired.
Application method and process control
Before application, surfaces are required to be dry, clean, and free of oil; this preparation is considered critical for the release film to spread evenly on the surface. The product can be applied evenly with a brush or cloth, and it can also be distributed by spraying with suitable equipment. Thin and uniform application helps maintain the release effect while preventing unnecessary build-up on the mould. For storage, the container must be kept tightly closed, protected from direct sunlight, and not exposed to storage temperatures above +50 °C; this is a basic condition for product stability and process safety.
Operating conditions and resistance approach
The product’s temperature resistance is given as -20 °C to +130 °C, which supports use planning in moulding lines that experience hot-cold cycles. The minimum shelf life at room temperature is stated as 24 months, helping make maintenance/production stock management more predictable. Its silicone-free character and lubricating effect serve operational goals such as easier mould release and reduced sticking risk on part surfaces. Since results can vary depending on application conditions and substrate material, determining the optimal application amount with a small line trial is a practical approach.
Sector-specific applications and compatible surfaces
The product is positioned as a release agent in plastics processing, especially in moulding methods such as injection, pressing, and vacuum forming. It can be considered in injection, thermoforming, and vacuum-forming lines where consistent release behavior is required on mould surfaces. Beyond plastics, its film effect aimed at reducing adhesion on mould surfaces, metal surfaces, and tool/equipment provides suitability for shared use by maintenance and production departments. Its silicone-free formulation and ability to be applied by different methods stand out as key advantages that increase process flexibility.





