Adhetron Addy-Sil 562 is a two-component, room-temperature-curing, silicone-based coating and encapsulation compound with thermal conductivity. Developed for use in potting and encapsulation applications for electronic components, this product offers a functional solution in systems requiring vibration reduction and reworkability. Thanks to its high temperature resistance and electrical insulation properties, it demonstrates a technically strong structure in sensitive electronic protection applications. Rather than being a conventional industrial adhesive, this product should be regarded as a silicone-based engineering material that provides both heat transfer and environmental protection.<\/p>\n
The product is silicone-based and, after mixing, presents a white appearance with a viscosity of approximately 2500 cps. In the official technical datasheet, the mixing ratio is stated as 100:25 by weight and 100:50 by volume; this provides predictable mixing behavior for controlled process applications. Its thermal conductivity is given as 1.0 W\/mK, hardness as Shore A 50, and specific gravity as 1.75. Since its temperature resistance is defined as approximately -65 \u00b0C to +200 \u00b0C, it is suitable for use in electronic systems exposed to high thermal loads. According to corporate website information, the Adhetron brand originates from Connecticut, USA; the technical document also states that the brand operates under Pulsar Chem. Industry and Trade Co. INC.<\/p>\n
Thanks to its two-component structure, Addy-Sil 562 reacts after mixing and cures at room temperature. The technical datasheet states a gel time of 2 hours and a full cure time of 24 hours, providing a controlled working window for casting and placement operations. Its primary application method is potting and encapsulation casting; therefore, it is suitable for use in junction boxes, electronic housings, and around circuits requiring protection. Its flexible structure contributes to vibration damping, while its suitability for rework when needed is also a significant advantage.<\/p>\n
This silicone coating compound has been developed especially for electronics and electrotechnical applications. Official product descriptions directly list automotive electronics, telecommunication equipment, transformers, cable termination sleeves, capacitors, coils, insulators, bushings, transducers, and re-enterable telephone cable splices as application areas. This sectoral range shows that the product can be used not only for filling purposes, but also in systems requiring thermal management, environmental protection, and electrical insulation. It is a technically suitable solution for applications where electronic components must be protected from environmental effects, vibration loads must be reduced, and more balanced heat distribution within the system is required.<\/p>\n
The product\u2019s key advantages include thermal conductivity, low shrinkage, high temperature resistance, and electrical insulation performance. The technical document states that the shrinkage value is below 1%, dielectric strength is at the level of 25 kV\/mm, and volume resistivity data are also provided. In addition, the inclusion of NASA outgassing values contributes to a more controlled evaluation of material behavior in sensitive electronic applications. Its shelf life of one year in the original unopened packaging also offers a practical advantage in terms of production and inventory planning.<\/p>\n","protected":false},"excerpt":{"rendered":"
A two-component silicone coating and encapsulation compound is used for filling, protection, and heat transfer in electronic components, junction boxes, and similar systems. Its thermally conductive structure, high temperature resistance, and flexibility help reduce the effects of vibration.<\/p>\n","protected":false},"featured_media":5171,"comment_status":"closed","ping_status":"closed","template":"","meta":[],"product_brand":[324],"product_cat":[295,290],"product_tag":[],"class_list":["post-5412","product","type-product","status-publish","has-post-thumbnail","product_brand-adhetron","product_cat-silicone-based-adhesives","product_cat-two-component-adhesives","first","instock","product-type-simple"],"_links":{"self":[{"href":"https:\/\/utmteknik.com\/en\/wp-json\/wp\/v2\/product\/5412","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/utmteknik.com\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/utmteknik.com\/en\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/utmteknik.com\/en\/wp-json\/wp\/v2\/comments?post=5412"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/utmteknik.com\/en\/wp-json\/wp\/v2\/media\/5171"}],"wp:attachment":[{"href":"https:\/\/utmteknik.com\/en\/wp-json\/wp\/v2\/media?parent=5412"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/utmteknik.com\/en\/wp-json\/wp\/v2\/product_brand?post=5412"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/utmteknik.com\/en\/wp-json\/wp\/v2\/product_cat?post=5412"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/utmteknik.com\/en\/wp-json\/wp\/v2\/product_tag?post=5412"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}