WEICON Easy-Mix HT 250 Resin-Based Epoxy Adhesive 50 ml is a two-component, epoxy resin-based industrial adhesive developed for applications requiring high temperature resistance. Its high bonding performance on metal and glass fibre-reinforced surfaces makes it particularly suitable for assembly and maintenance processes under thermal load. This light grey, high-viscosity system provides technical advantages in joints that require controlled application and gap bridging. Manufactured by WEICON GmbH & Co. KG in Germany, this industrial adhesive stands apart from standard epoxy systems with its high temperature resistance.<\/p>\n
Technical structure and performance features of Easy-Mix HT 250
This product is a two-component, epoxy resin-based system with a 2:1 mixing ratio by volume. According to the technical data sheet, the mixed viscosity is approximately 38,000 mPa\u00b7s, the mixed density is approximately 2.1 g\/cm\u00b3, and the maximum gap-filling capacity is 4 mm. After curing, it achieves a tensile strength of 30 MPa, compressive strength of 80 MPa, flexural strength of 60 MPa, and Shore D hardness of 80. In addition, this industrial adhesive provides continuous temperature resistance up to +200 \u00b0C and short-term resistance up to +250 \u00b0C; the product information also states that it retains more than 80% of its strength even at high temperatures.<\/p>\n
Application method and process conditions
Easy-Mix HT 250 is applied directly using a dual cartridge and static mixer; it is recommended that the first small amount dispensed should not be used. Surfaces must be clean, dry, and free from oil to ensure proper bonding performance. According to the technical data, the processing temperature range is between +10 \u00b0C and +40 \u00b0C, while the curing temperature range is between +10 \u00b0C and +50 \u00b0C. For 10 ml of mixed material at 20 \u00b0C, the pot life is approximately 4 minutes, the initial strength is reached in about 30 minutes, the handling strength in approximately 3 hours, and the full final strength in 24 hours. For this reason, it is a suitable industrial adhesive solution for serial assembly and controlled process applications.<\/p>\n
Areas of use, surface compatibility, and key advantages
This industrial adhesive has been developed for bonding metal parts, assembling glass fibre-reinforced components, joining equipment exposed to high temperatures, and bonding applications prior to powder coating processes. Its high resistance to aggressive environments such as hot and cold water, engine oil, and glycol supports its use in automotive, machinery manufacturing, maintenance and repair, metalworking, and surface treatment industries. High thermal resistance, high thermal conductivity, strong adhesion on metal surfaces, and resistance to aggressive environments are among its main advantages. It provides a reliable bonding solution especially for systems where high temperature resistance is technically required, primarily on metal and fibreglass.<\/p>\n
Standards and safety framework for HT 250
The technical document states that the dielectric strength is above 24 kV\/mm at 20 \u00b0C, and the product is reported to comply with MIL-C-24176. According to the safety data sheet, the hardener component may cause serious eye damage, skin irritation, and allergic skin reactions; therefore, gloves and suitable eye-face protection should be used during application. Within this framework, Easy-Mix HT 250 is evaluated as a technically defined, reliable, and professional-grade industrial adhesive for metal and composite systems operating under high temperatures.<\/p>\n","protected":false},"excerpt":{"rendered":"
Two-component epoxy adhesive used for the secure bonding of metal and glass fibre-reinforced surfaces under high temperatures. It stands out in technical assembly and maintenance processes with its high heat resistance, controlled application, and resistance to aggressive environments.<\/p>\n","protected":false},"featured_media":4697,"comment_status":"closed","ping_status":"closed","template":"","meta":[],"product_brand":[326],"product_cat":[293,290],"product_tag":[],"class_list":["post-5380","product","type-product","status-publish","has-post-thumbnail","product_brand-weicon","product_cat-epoxy-adhesives","product_cat-two-component-adhesives","first","outofstock","product-type-simple"],"_links":{"self":[{"href":"https:\/\/utmteknik.com\/en\/wp-json\/wp\/v2\/product\/5380","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/utmteknik.com\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/utmteknik.com\/en\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/utmteknik.com\/en\/wp-json\/wp\/v2\/comments?post=5380"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/utmteknik.com\/en\/wp-json\/wp\/v2\/media\/4697"}],"wp:attachment":[{"href":"https:\/\/utmteknik.com\/en\/wp-json\/wp\/v2\/media?parent=5380"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/utmteknik.com\/en\/wp-json\/wp\/v2\/product_brand?post=5380"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/utmteknik.com\/en\/wp-json\/wp\/v2\/product_cat?post=5380"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/utmteknik.com\/en\/wp-json\/wp\/v2\/product_tag?post=5380"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}