WEICON Easy-Mix N 5000 Epoxy Adhesive 50 ml is a two-component, epoxy resin-based industrial adhesive developed for bonding applications where a clean and transparent bond line is desired. Thanks to its non-filled structure, the product has a fluid, self-levelling character, which provides an advantage especially in applications requiring a neat adhesive line. In the technical data sheet, the mixing ratio is stated as 1:1, the mixed viscosity as approximately 5,000 mPa\u00b7s, and the pot life at 20 \u00b0C as approximately 20 minutes; on the official product page, this time is also given as approximately 17 minutes, so ambient temperature and mixed quantity should be taken into account during application. Its 50 ml dual-cartridge format allows controlled dispensing with a static mixer, making this industrial adhesive practical for production, assembly, and maintenance work.<\/p>\n
Easy-Mix N 5000 technical structure and performance
This product is a non-filled epoxy resin-based system designed to provide a translucent, crystal-clear appearance after final curing. Mechanical data indicate a tensile strength of 40 MPa, a flexural strength of 50 MPa, and a Shore D hardness of 65, making it suitable not only for visually demanding applications but also for many uses with structural performance expectations. Lap shear values are stated as 21 N\/mm\u00b2 on blasted steel, 19 N\/mm\u00b2 on blasted aluminium, and 14 N\/mm\u00b2 on roughened rigid PVC. It offers temperature resistance from -50 \u00b0C to +100 \u00b0C and a maximum gap-bridging capacity of 2 mm; for this reason, it stands out as a reliable industrial adhesive solution in applications with controlled joint geometries.<\/p>\n
Application method and process requirements
WEICON Easy-Mix N 5000 is applied directly with the static mixer supplied with the dual cartridge, and it is recommended that the first approximately 5 cm of material not be used. Surfaces must be clean, dry, and free from oil; otherwise, bonding performance may decrease. According to the technical data, the processing temperature is between +10 \u00b0C and +35 \u00b0C, while the curing temperature is between +6 \u00b0C and +40 \u00b0C; about 35% strength is achieved after approximately 60 minutes, handling strength after about 3 hours, and full final strength after 48 hours. As temperature increases, pot life and curing time become shorter, while at temperatures below +16 \u00b0C these times become noticeably longer; the fact that no reaction occurs at around +5 \u00b0C and below is a critical process consideration.<\/p>\n
Surface compatibility, areas of use, and advantages
This epoxy adhesive is positioned as being compatible with metal, many plastics, fibre composites, ceramics, glass, stone, and wood surfaces. Application areas include furniture manufacturing, decorative and design objects, shopfitting and display installations, exhibition stand production, light industrial assembly, and workshop tasks where an aesthetically clean bond line is required. It can be especially preferred in glass-to-wood, metal-to-decorative panel, and composite-based part assemblies, as well as in visible-joint bonding where a transparent bond line is important. Its self-levelling behaviour, controlled cartridge application, and balanced short-to-medium pot life make it an efficient industrial adhesive for precise assembly work.<\/p>\n
Manufacturer, safety, and standards information
The product is manufactured by WEICON GmbH & Co. KG, based in Germany. The technical document includes performance values determined according to standards such as DIN EN ISO 527-2, DIN EN ISO 604, DIN EN ISO 178, DIN ISO 7619, DIN EN 1465, DIN EN ISO 22007-4, DIN EN 62631-3-1, and DIN EN 60243-1, showing that the data are presented within a corporate and engineering-based framework. According to the safety data sheet, the resin component may cause skin and eye irritation and may trigger an allergic skin reaction; therefore, gloves and eye protection should be used during handling. As a result, Weicon Easy-Mix N 5000 is a balanced, reliable, and process-suitable industrial adhesive option for applications requiring both a transparent appearance and technical strength.<\/p>\n","protected":false},"excerpt":{"rendered":"
Two-component epoxy adhesive used for the aesthetic and strong bonding of metal, plastic, glass, ceramic, and wood surfaces. It stands out with controlled application, a near-transparent bond line, and suitability for various industrial assembly tasks.<\/p>\n","protected":false},"featured_media":4728,"comment_status":"closed","ping_status":"closed","template":"","meta":[],"product_brand":[326],"product_cat":[293,290],"product_tag":[],"class_list":["post-5353","product","type-product","status-publish","has-post-thumbnail","product_brand-weicon","product_cat-epoxy-adhesives","product_cat-two-component-adhesives","first","outofstock","product-type-simple"],"_links":{"self":[{"href":"https:\/\/utmteknik.com\/en\/wp-json\/wp\/v2\/product\/5353","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/utmteknik.com\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/utmteknik.com\/en\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/utmteknik.com\/en\/wp-json\/wp\/v2\/comments?post=5353"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/utmteknik.com\/en\/wp-json\/wp\/v2\/media\/4728"}],"wp:attachment":[{"href":"https:\/\/utmteknik.com\/en\/wp-json\/wp\/v2\/media?parent=5353"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/utmteknik.com\/en\/wp-json\/wp\/v2\/product_brand?post=5353"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/utmteknik.com\/en\/wp-json\/wp\/v2\/product_cat?post=5353"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/utmteknik.com\/en\/wp-json\/wp\/v2\/product_tag?post=5353"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}